{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
➊ Unlock the safety lock and slide the slider tab outward toward the rim.
➋ Press down the safety lock to lock in position. With some force applied to the safety lock, pull up one side of the slider base.
➌ Lift the whole slider tab with the base along the track.
❹ On the back of the safety lock, push the lock outward from the raised part.
❺ It is disassembled when the “click” sound is heard, and then clean the slider base.
➊ Have the raised part on the back of the safety lock facing toward the silicone position of the slider tab, push the safety lock through the hole of the slider tab, and align with the raised point. It is locked in once a "click" sound is heard.
➋ With the slider base pointing up (short side of the slider base facing down) and the concave surface facing the cup mouth, slide in and snap the base into the drinking lid.
➌ With the slider base tilting up, place the silicone side of the slider tab facing down, align with the track and push it into the slider base.
❹ Once it has slid in, press down the tilted slider tab until a “click” sound to complete the assembly.
➊ Remove the silicone ring on top of the cold brew filter.
➋ Place the silicone ring inside the cold brew filter.
➌ Fold the pour over filter silicone sleeve inward and insert it into the drinking lid.
❹ Put the cold brew filter into the mug and then close the mug with the assembled drinking lid.
➊ Choose preferred coffee beans for grinding (using Dyn electric coffee grinder is acceptable).
➋ Place the pour over filter funnel on top of the lid base and add the ground coffee (use 1:16 coffee to water ratio for brewing).
➌ Prepare 220mL/ 420mL of 85-95 degrees Celsius hot water and pour it into the filter funnel. Start from the center of the filter funnel and move outward in a circular motion slowly and then circle back to the center.
❹ When the ground coffee expands to the second folding line of the filter silicon sleeve, stop pouring water and wait.
❺ After the expanded ground coffee begins to collapse, repeat the above step to add hot water in a circular motion. The water flow needs to be controlled, stable, and in small amounts.
❻ Bubbles will start to form after hot water is poured in. At this point, please wait for the water to flow down.
❼ If the ground coffee is soaked for too long, do not wait for all the hot water to flow out. Instead, remove the filter funnel. This is to avoid the bitter flavor resulting from the long extraction.
➊ Choose preferred coffee beans for grinding (For Dyn electric coffee grinder, see its instruction manual for details).
➋ Place the cold brew filter on top of the lid base and pour in the ground coffee (use 1:12 - 1:17 coffee to cold water ratio).
➌ Prepare 295mL/ 495mL of around 20-30 degrees Celsius room temperature water and pour it into the coffee mug.
❹ After pouring in the water, close the coffee mug lid and lock it tightly.
❺ Put the mug in the refrigerator and let it refrigerate for 8-12 hours.
❻ After that, remove the cold brew filter and enjoy the cold brew coffee.
➊ Use the Dyn electric coffee grinder, turn the lower knob to the tightest scale, and then turn back 4 scales for the recommended grind size.
➋ The grind size affects your coffee flavor. If a stronger flavor is preferred, turn the scale to 4; if a lighter taste is preferred, turn the scale to 6.
.Wash the product thoroughly before first use.
.Do not wash it in the dishwasher, do not use steam/ ultraviolet sterilizer, high temperature sterilization, and active dryer to avoid damage to the surface coating.
.For daily cleaning, use a soft sponge with neutral detergent, and let it dry naturally.
.Do not allow children to use the product without adult supervision.
.Do not use dry ice or carbonated drinks when the mug is sealed to avoid injury caused by mug components and drink explosion resulting from high internal pressure.
.It is recommended to fill less than 80% of the mug volume, as excess may cause leakage and overflow.
.Do not place the product near or in heat sources such as microwave and oven.
.Do not place the product in the freezer to avoid product damage..It is recommended to finish the drink as soon as possible if packed with dairy products to minimize bacterial growth.
.Do not place the mug body into boiling water to avoid product damage..Do not shake the mug vigorously when filled with hot water to avoid scalding caused by hot water splashing.
.It is recommended to stop using the product if the body is damaged from a drop or overturn and suffering a severe impact.